Tagged: “historic windows”

Historic Wooden Windows

window imagaes

There are many resources out there that can explain theĀ  facts and myths of the replace vs. restore historic windows debate. Despite the bad rap windows account for only 10-15% of energy lost through mostly air filtration. One thing to do is to make sure your windows fit tightly by repairing them and adding weather-stripping, interior or exterior storms and interior window treatments.

According to the Weatherization Tool Kit by the Division for Historic Preservation, they suggest avoiding replacing historic windows with new windows. You may find asking yourself why bother because of all the extra time and effort it takes.
But here are some reasons that will encourage you to restore your historic windows:

  1. Replacement windows are often more expensive, they have a limited life span.
  2. Replacement windows can change the character of your historic home.

If you live in a Historic District in Albany you should check with the Historic Resources Commission (HRC) to follow their suggested protocol. It is important to be aware of what we talked about way back in the first post. Check with your local agencies!

Here is a diagram of common windows to historic buildings found through NY State:

Image

The key component is to think about each individual window. Creating a survey system of each window and door will be really helpful. Simply rate the windows (poor, fair, good, excellent) Once you have a survey of each window you can account for the individual circumstances of each one.

Common Problems with historic windows:

  • Sticky Windows/ Loose Windows
  • Replacing Glazing and Putty
  • Sash Cords and Weights
  • Cracked Paint: If your house was built prior to 1978, trim and window elements likely contain lead. See Environment Protection Agency for regulation

Here is a diagram from the Division for Historic Preservation NY State Office of Parks, Recreation and Historic Preservation of where the air infiltration occurs most often:

Image

A. Weather-stripping should be installed at the jambs, the sill, the head and the meeting rails. Use a thin putty knife to slip behind the stop and lightly pry off. This will allow you to remove the sash and install spring bronze.
B. Spring bronze is a good choice for the jambs. The strip is nailed to the jamb channel along the interior side of the stop or parting bead.
C. An interlocking strip is best for the meeting rails. When the window is closed, the strips close off any air gaps. The sash lock pulls the meeting rails tight.

Here is six minute video from Mac Bagala called Window Restoration 101. The video outlines the process involved in restoring a historic window. He has even included a soundtrack for your enjoyment. I really enjoyed seeing the entire process and while we often just want to get our windows un-stuck and opened, I can now see the patience and craftsmanship involved in restoring old wooden windows.

In addition, John Leake a Maine preservationist has a great resource on the web as well as a book called Save America’s Windows that is a very useful guide.

Here are further resources for your use:

Articles
Embracing Energy Efficiency
PRESERVATION: Closing the door on vinyl windows
What Replacement Windows Can’t Replace
Seven to Save Endangered Property List, 2006 Original and Historic Wood Windows Repair and Preservation

Brochures & Guides

2008 Window Tip Sheet, National Trust for Historic Preservation
Historic Resource Commission Ordinance, Windows
Wood Window Repair Handbook

We have a list of local specialists in Albany that we’d be happy to share with you.
Please contact us if you have any further questions.

Advertisements